Trakker - DB7-R Bite Alarm

The Trakker DB7-R Bite Alarm, released following 5 years of exhaustive development, and testing time out on the bank by their dedicated team of pro anglers. With a lot of manufacturers now selling overcomplicated bite alarms with features you'll never use or need. Trakker have refined these alarms to include technology and advances that you will genuinely find useful in your fishing. Starting with the strong water resistant IPX68 rated ABS casing, and with additional waterproofing protecting the digital circuitry inside. Bite detection is given by a roller wheel with eight individual magnets, offering a matching eight differing levels of sensitivity. They will give an audible tone and visual difference between forward runs and drop backs, with the LEDs's flashing for a run, and going solid for a dropback.  .  

Features

• Alarm head
• PS (Power-On Protection System) stops accidental power up and wasted battery
• ISM (Intelli-Sense Mode) eliminates false indication in rough weather and boat fishing
• Db-Mag Roller features 8 precision magnets and a high-performance O-ring for true indication in all weather conditions
• Tough ABS weatherproofed case and battery compartment (IP68 rated) designed for the most demanding of conditions
• Digital circuitry and internal component weatherproofing
• Built-in SRT (Sync-Connect Receiver Technology) for long range and obstacle link signal optimisation
• Tru-tone cone speaker for loud frequency delivery
• Dual-descent tone drop-back differential
• Dual super bright multi-colour LEDs, easily change from red, green, blue, yellow, purple & white
• Peek-view LED positioning aids visual indication from side to side
• One-touch night light function, both LEDs illuminate to 25% brightness
• Solid latching LED for forward indication
• Flashing latching LED for drop-back indication
• Indexed volume control wheel (8 volume settings, including silent)
• Indexed tone control wheel (8 tone settings)
• Indexed sensitivity control wheel (8 sensitivity settings)
• Power out socket (2.5mm) for use with illuminated indicators
• Low battery warning
• Rod-friendly rubber inlay grips
• Rigid 3/8" stainless steel thread and blackout locking nut
• Requires 1 x PP3 9V battery
• Supplied with a Sure-Fit protective rubber case

Specifications

• Dimensions - 11.2 (L) x 5.4 (W) x 4.5 (H) cm
• Weight - 98g
• Material - ABS

UK Orders Under £25

• Standard Delivery (3 - 5 working days): £5
• Next Day Delivery: £10
• No Rush Delivery (allow 7 working days and receive a 5% off promo code for your next order): £5

Products over 1.5m incur a £3 oversized surcharge to UK mainland customers. Spending £150 exempts the oversized item surcharge.

---

UK Orders Over £25

• Standard Delivery (3 - 5 working days): £0
• Next Day Delivery: £5
• Next Day Delivery (before 12pm): £10
• No Rush Delivery (allow 7 working days and receive a 5% off promo code for your next order): £0

Products over 1.5m incur a £3 oversized surcharge to UK mainland customers. Spending £150 exempts the oversized item surcharge.

---

Non-UK Mainland

• Orders Under £50: £5
• Orders Over £50: £15

Unfortunately we are not able to ship to Jersey (JE) or Guernsey (GY).

---

EU

We ship to the EU using Global-E. Please refer to their website for further information.

---

Please click here for full delivery details.

In order to qualify for a complete refund or exchange, the returned item must reach us in an unused condition and in its original packaging within 30 days of your receipt. Returning your purchase by post or courier after the specified periods (except for faulty or damaged products) may result in us not processing your return.

You can initiate the return using the My Returns section on the My Account page. Our team will promptly respond to the return, and upon acceptance, you will receive a returns form.

Ensure accurate selection of reasons/actions during the return process. Incorrect details may lead to shipping costs being deducted from the refund.

---

Please click here for full returns details.