We value your privacy. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Gardner - Sensi Line Clips Pack of 3
FREE delivery available. See more delivery Information
UK orders under £30
Standard Delivery £5
Next Day Delivery (Order before 11am) £10
UK orders over £30
Standard Delivery FREE
Next Day Delivery (Order before 11am) £5
Next Day Delivery before 12pm (Order before 11am) £10
Orders under £50 – £5
Order over £50 – £15
Unfortunately we are not able to ship to Jersey (JE) or Guernsey (GY).
Total Tackle is now able to ship to the EU again! We are working with Global-E to allow us to reopen to the EU, please see our EU Orders Info page for further information
LAST DATES FOR CHRISTMAS OVERSEAS DELIVERY
For shipping into the European Union Global-E recommend that the last date for guaranteed shipping in time for Christmas will be Thursday 8th December 2022.
Please click HERE for full delivery details
Using a line clip on the rod blank in front of your reel enables you to create the optimum angle for bite indication between the bobbin, hanger and buzzer. By changing the position of a line clip you can fine tune your bite indication to suit different fishing situations.
By reducing the distance between the clip and the bobbin (by positioning the clip further forward in front of the reel) you can increase the sensitivity of your bite indication, as the increased angle this creates from the clip down to the bobbin reduces the tension. This is helpful for fishing with slack lines and has the effect of making the bobbin relatively lighter’.
Alternatively, for long range angling, with larger bobbins, having the line clip positioned as far away from the butt ring/bite indicator as possible (towards the reel) helps to create the maximum potential load on the line and increase the bite indication when fishing with a tighter line.
Simple to use:
Simply position the clip on the side of the blank at the required distance from the reel.
Position the O-ring into the groove on one side of the clip.
Pull the O-ring around the back of the rod blank.
Position the O-ring into the remaining groove making sure the ring is pushed securely into the channel.
The design of Sensi-Clips also allow you to adjust your bobbins without pulling the line fully out of the clip, as the line can be fed through the void on the inside of the clip as necessary.
Each pack contains 3 x Sensi-Clips and 3 x 25mm UV resistant O-rings.