The Trakker DB7-R 3 Rod Bite Alarm Set, released following 5 years of exhaustive development, and testing time out on the bank by their dedicated team of pro anglers. With a lot of manufacturers now selling overcomplicated bite alarms with features you'll never use or need. Trakker have refined these alarms to include technology and advances that you will genuinely find useful in your fishing. Starting with the strong water resistant IPX68 rated ABS casing, and with additional waterproofing protecting the digital circuitry inside. Bite detection is given by a roller wheel with eight individual magnets, offering a matching eight differing levels of sensitivity. They will give an audible tone and visual difference between forward runs and drop backs, with the LEDs's flashing for a run, and going solid for a dropback. Those same settings are replicated on the receiver box, with automatic synching to your alarm head LED colour choices .
Features
Alarm head
- PS (Power-On Protection System) stops accidental power up and wasted battery
- ISM (Intelli-Sense Mode) eliminates false indication in rough weather and boat fishing
- Db-Mag Roller features 8 precision magnets and a high-performance O-ring for true indication in all weather conditions
- Tough ABS weatherproofed case and battery compartment (IP68 rated) designed for the most demanding of conditions
- Digital circuitry and internal component weatherproofing
- Built-in SRT (Sync-Connect Receiver Technology) for long range and obstacle link signal optimisation
- Tru-tone cone speaker for loud frequency delivery
- Dual-descent tone drop-back differential
- Dual super bright multi-colour LEDs, easily change from red, green, blue, yellow, purple & white
- Peek-view LED positioning aids visual indication from side to side
- One-touch night light function, both LEDs illuminate to 25% brightness
- Solid latching LED for forward indication
- Flashing latching LED for drop-back indication
- Indexed volume control wheel (8 volume settings, including silent)
- Indexed tone control wheel (8 tone settings)
- Indexed sensitivity control wheel (8 sensitivity settings)
- Power out socket (2.5mm) for use with illuminated indicators
- Low battery warning
- Rod-friendly rubber inlay grips
- Rigid 3/8" stainless steel thread and blackout locking nut
- Requires 1 x PP3 9V battery
- Supplied with a Sure-Fit protective rubber case
Specifications
- Dimensions - 11.2 (L) x 5.4 (W) x 4.5 (H) cm
- Weight - 98g
- Material - ABS
Receiver Unit
- PPS (Power-On Protection System) stops accidental power up and wasted battery
- Tough ABS weatherproofed case and battery compartment (IP68 rated) designed for the most demanding of conditions
- Digital circuitry and internal component weatherproofing
- Built-in SRT (Sync-Connect Receiver Technology) for long range and obstacle link signal optimisation
- Easily connect and update alarms, 4 per channel (16 total)
- Alarm tone and LED colour are automatically updated on receiver when adjusted on alarms
- Tru-tone cone speaker for loud frequency delivery
- D-Vibe vibration setting transmits pulses per bleep and in silent mode
- LER (Last Event Recall) indicates the last event sent to the receiver
- Indexed volume control wheel (8 volume settings, including silent)
- Low battery warning
- Self-standing case design
- Requires 1 x PP3 9V battery
- Supplied with lanyard
Specifications
- Dimensions - 9.2 (L) x 5.4 (W) x 4.5 (H) cm
- Weight - 72g
- Material - ABS