Evolve Tackle - Run Ring System "-" Kits

For a semi-fixed set-up, simply push the Run Ring over the Bead ribs, locking it in place (Running Sleeve not used). The fitment of the Angled Run Ring on the “-” Bead is tuned for reliable release when used with weights/leads of 3oz and under.

For a free running set-up, simply mount the Running Sleeve onto the line via the slot (no need to break the line/leader), and push it over the Bead ribs, locking it in place, and with the Bead ribs covered, the Run Ring is prevented from engaging and is free running.

The Bead features internal alignment features for the swivel, so it always assembles correctly for optimal performance. This also provides thicker walls and extra protection.

The Bead has a long tapering top section for extra line/leader protection inside the Run Ring, and to smoothly guide the Run Ring into position when fished free running.

The Bead’s long tapering top section accommodates rig tubing insertion, gripping it firmly in place.

The low profile angled Run Ring allows the weight/lead to hang vertically, and is supplied with a Silicone Sleeve to cover the Weight Link – Improving aerodynamics on the cast, and helping to prevent tangles.

The system is designed so that when fished semi-fixed, the Bead will always release the Run Ring before the swivel pulls out from the Bead (so in the event of a line breakage the line/leader/tubing will pull through the large bore of the Run Ring, not through the small bore of the Bead – essential for a safe set-up!).

The Ring is moulded in a hard plastic for a low friction and hard wearing set-up.

Bead & Running Sleeve both moulded in the Evolve translucent ‘dark camo’ finish, to compliment all the Evolve end tackle products, and enhance rig concealment.

Available in six per pack.